The precision that typifies MAFELL portable bandsaws enables the Z 4 Ec and Z 5 Ec to execute extremely clean and perfectly square cuts.
The cooling air of the high-performance motor is utilized to blow away dust from the mark. As a consequence, chips are kept well away from your head and you maintain a clear view of the mark at all times.
* The back-toothed blade facilitates retraction from the cut, which is especially easy if the blade is locked by the mechanical brake.
* The unique tilting blade guide allows right-angle cuts to be made up to 90 mm (3 9/16 in.) deep without the opposite side of the blade touching the wood, e.g. when cutting lapped joints.
* With a spring-mounted and tensioned idler wheel, changing blades is an easy and quick procedure.
Technical Specification:
power input :230V 2HP
depth under guides :305mm
max tilt angle :30 deg
wheel diameter ;205mm
blade length :1752mm 69"
blade width :6-8mm
Nominal no-load speed 650 - 1550 1/min
Nominal input 2250 W
Cutting speed 6,9 - 16,6 m/s
Weight 13,7 kg
machine is also available in 415V 3 phase.
typical operations are as follows:
___________________________
-profiling girders and rafters, perpendicular crosscuts and sweeping curves can all be cut with a clean finish. Four sided profiling is easily and accurately accomplished for post tops etc.
-single tenons and chamfered tenons can easily be sawed without turning the workpiece over. only one side need be marked.
other joints that can be cut:
-half lap joints,
-sloping joints,
-scarf joints
-braces with skew notches
-double skew notches,
-oblique compound skew notches
Delivery specification
1 Saw band, 8 mm (5/16 in.) wide, 4 teeth per inch, with front and rear cutting teeth
1 Saw band, 6 mm (1/4 in.) wide, 4 teeth per inch
1 Saw band, 8 mm (5/16 in.) wide, 4 teeth per inch
1 Handle for two-man operation
1 Parallel guide fence
1 Mains cable 10 m (32.8 ft)