Woodworking Machinery
..The Equipment Experts

Description:
MORSO-F cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.
MORSO-F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.
The F has a special lever system for wide profiles - the knife block has stepped horizontal adjustment allowing progressive cuts until the full width is achieved. Twin return springs automatically bring the knives back to starting position.
When using MORSO-F you will have no dust compared to a saw. Also the waste of your moulding will be minimized as MORS+-F cuts double mitres very close. ( less than one mm waste of moulding ). The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre. One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding................( That is only with 100 cuts a day...... ).
MORSO-F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences (45-90°), and adjustable rebate supports as well as a perspex guard.
Technical data for MORSO-F

Double mitre 45°
Single mitre up to 90°
Cutting width max. 100 mm
Cutting height max. 160 mm
Square cutting 65/65 mm
Measuring scale up to 1500mm
Net weight 98 kg