Woodworking Machinery
..The Equipment Experts

A heavy duty wide belt sander capable of sanding solid and veneered boards. Fitted with a vacuum table for holding down small workpieces or smooth faced boards such as lacquered surfaces.
Control panel
powered adjustment of working thickness
digital readout of working thickness
natural rubber feed belt
automatic device for feed belt tracking and tensioning
floating rubber-coated pressure rollers in the front/rear side of the operating groups
infeed flexible steel pressure plate on first operating group
2 infeed support rollers and 2 outfeed support rollers on the feed belt
pneumatic oscillating of sanding belts
dust extraction outlets with a shape which assures a low air consumption
"Hand-safety" emergency device in the infeed panel area
front and rear emergency pushbutton
padlockable main switch
overload protection on main motors
automatic brake for rapid shutdown of operating groups
automatic emergency stop machine for:
sanding belt breaking
overload on main motors
RRCS 1300 - Automatic wide belt sander
FIRST UNIT "R" equipped with:
Metal helical grooved roller 140 mm diameter
SECOND UNIT "R" equipped with:
'R/140' roller 140 mm diameter
65 SH rubber coated roller
THIRD COMBINED UNIT "CS"
equipped with:
'CR/140' roller 140 mm diameter
45 SH rubber coated roller, sectional pad
On/Off pneumatic selector of the 1st,2nd and 3rd roller
activated by pneumatic cylinder, complete with
micrometric adjustment of roller position
according to the abrasive belt thickness
Outfeed cleaning unit
equipped with:
cleaning brush, 150mm diameter
1 hp main motor
exhaust hood
roller position adjustment
Taster device
Variable belt speed from 3 to 17 m/min
with 3hp feed motor.
Automatic anti-dubbing device
synchronized with feed belt speed.
Electronic sectional pad with 24 sectors
complete with electronic programmer and
infeed reading bar
the sectors are activated by the
electronic programmer which synchronizes the antidubbing
device with the feed speed and activates the
quantity according to the geometric shape of the
workpiece. It allows the selection of a higher or
lower number of sections to the left, to the right or
on both sides of the piece.
working pressure adjustment
flat semi-stiff contact insert made of
steel flexible plate 0,6 mm thickness+ felt D=0,68
and and extractable graphite cloth.
Suitable for the sanding of solid wood and veneered panels
Come with in and outfeed table with idle rollers
Technical Specification:
Model Sandya 10 RRCS
Serial number AE/016963
Year of manufacture 1998 CE
Max board width 1300mm
Max board thickness 160mm
Belt dimensions 1900x1300mm
Motor power on first belt 30hp
Motor power 2nd,3rd heads combined 25hp
Vacuum moter power 5.5kw
Feed speeds (variable) 3-17m/min
Compressed air consumption 200 NI/min
Machine weight 2950kgs
Machine dimensions 2300x1900x2500mm
Dust outlets 3 x 160mm