Sedgwick TES 3 Head Tenoning Machine
Flexible tenoning machine with three heads. Each head is independently adjustable to allow you to produce either square shouldered tenons, offset tenons or mitred tenons. The main heads are equipped with digital readouts with 0.1mm resolution allowing you to set up quickly and accurately in minutes.
Profiled scribing cutters and limitors can be fitted into the 'combi' tenon heads or a wide variety of optional tooling is available for the third shaft allowing the rapid production of finger joints, storm proof or scribed tenons.
This is an ideal machine for small to medium sized workshops - compact and easy to use. The machine is supplied complete with blocks to take disposable TC cutters on the first 2 heads.
Technical Specification:
Timber capacity 130 x 310mm Timber capacity with fence at 45 degrees 130 x 250mm Maximum tenon length 155mm Maximum length of tenon 2 passes 205mm Vertical adjustment bottom block 50mm Vertical adjustment top block 100mm Horizontal adjustment top block + / - 32mm Sliding table size 800 x 310mm Table working height 860mm Main cutter head diameters 175mm Main cutterhead motors 3hp each Scribing spindle motor power 5.5hp Scribing spindle diameter 30mm, end tapped M12, 8mm k/way Effective scribing shaft length 75mm Vertical movement scribing shaft 95mm Horizontal movement scribing shaft30mm Maximum tooling diameter 210mm
Weight 470kg Shipping dimensions 1320 x 1020 x 1550mm
Machine available as two head version (no separate scribing facility)
Machines equipped as standard with: - disposable TCT tip cutterheads - cast iron frame - full CE regulations - direct drive to heads - position indicators to rise & fall and offset of tenon heads