Woodworking Machinery
..The Equipment Experts

Mafell MKS165E
Carpenter's portable circular saws with extraordinary weight/performance ratio. Only possible due to the use of ultra-modern die-cast magnesium alloys. Tiltable to 60°. That makes the portable circular saws a universal partner. An easy-to-read scale on the cutting depth adjustment makes work easier and saves tiresome re-measurement. Like all our portable circular carpentry saws, these two saws also fit snugly onto the MAFELL guide rail system.
Equipped with intelligent control electronics. These ensure a smooth start-up and constant speed under load, as well as speed reduction to protect the machine when idling and overload protection. The easy-to-use stop system of the MKS165E and the adjustable hose connector make your work much easier.
 Large cutting depths
 Maximum stability with minimum weight
 Tool brake
 With tool brake - for optimum operator safety and work processes.
 Constant cut display for 0 - 60° - due to exact centre of rotation, which is on the underside of the base plate.
 Lower saw guard with remote control - for easy release of the saw blade, e.g. when positioning at sharp angles.

Top results, as shown here with the MKS165E, can only be achieved with original MAFELL tools.

The cutting depth can be adjusted easily via a precise handwheel.

The tilt range of 0° - 60° enables extreme bevel cuts.

The constant cut display.
Supplied with:
1 TCT saw blade 410 x 2.5/4.2 x 30 mm (161/8 in.), AT, 28 teeth
Ref. No. 092525
1 hose connector for chip extraction, inner - ¥ 58 mm (25/16 in.)
Ref. No. 202203
1 Allen key WAF 6
Ref. No. 093081
1 parallel guide fence
10 m (32.8 ft) mains cable with plug
Technical data
Cutting depth
Saw blade ¥
Tilt range
Nominal no-load speed
Normal load speed
Cutting speed
Universal motor
Nominal input
Nominal output
Weight
MKS 165 E
85 - 165 mm (33/8 - 61/2 in. )
410 mm (161/8 in.)
0 - 60°
1585 rpm
1450 rpm
- nominal load 31 m/s (101.7 ft/sec.)
- voltage 230 V
- frequency 50/60 Hz
2700 W (3.6 hp)
1730 W (2.3 hp)
17 kg (37.5 lbs)
Accessories
Guide rail 3 m (9.8 ft) long (2 pieces with connecting piece)
Ref. No. 037037
Guide rail 3 m (9.8 ft) long (one piece)
Ref. No. 200672
Guide rail extension 1.5 m (4.9 ft) long
Ref. No. 036553
Adapter pair for parallel guide fence
Ref. No. 037195
TCT saw blade for universal use 410 x 2.5/4.2 x 30 mm (161/8 in.), AT, 28 teeth
Ref. No. 092525
TCT saw blade for ripping cuts 410 x 2.5/4.2 x 30 mm (161/8 in.), AT, 20 teeth
Ref. No. 092522