Home > Used Machinery > Presses and cramps - used
Ramarch Carcase Press
The cramp is designed for kitchen type cabinets allowing the process to be completed in one operation, the cramp has had light use and is in excellent ....
Ramarch Carcase Cramp
Pneumatic operation carcase cramp
Model PN28
Machine no 5311
Working stations ....
Model PN28
Machine no 5311
Working stations ....
Interwood HEP 8x4 4 daylight Press
Designed for applying veneers to boards. Platens are aluminium in good condition, heating speeds up the gluing process.Hydraulically operated through ....
Burkle ODWMP Multifor Membrane Press
Burkle downstroke membrane - flat press line model ODWMP 1426/6
Pressline for the lamination of 3D or flat pressing of laminates. Downstroking press ....
Pressline for the lamination of 3D or flat pressing of laminates. Downstroking press ....
OTT 10 x 6 Heated Press
A single daylight heated press with two aluminium platens.
Designed for applying veneers to boards. Heating speeds up the gluing process. Each platen ....
Designed for applying veneers to boards. Heating speeds up the gluing process. Each platen ....
Taylor Laminating Windmill Cramp
Taylor F990 CLAMP CARRIER,
serial no. 800156,
with Taylor GA845 Glue Applicating Conveyor, serial no. 300187 300192, 500mm wide, Binks pneumatic ....
serial no. 800156,
with Taylor GA845 Glue Applicating Conveyor, serial no. 300187 300192, 500mm wide, Binks pneumatic ....
Maweg Table Cramp - Hydraulic
A modern hydraulic cramp for door, window frames etc. Rams are operated via levers on the side of the machine. 6 rams are supplied, 4 side rams and 2 ....
Ryburn Stair Cramp
Designed for cramping straight staircases upto 1100mm wide and 4260mm in length. Hydraulically operated lower platen via manual pump. Top platen can be ....
Interwood HEP 250x120 Hot Press
INTERWOOD TYPE HEP 5 PLATEN UPSTROKING
LAMINATING HOT PRESS,
2.450 X 1.535MM X 8000 LB/IN²,
SERIAL NO. 684 - 1996
LAMINATING HOT PRESS,
2.450 X 1.535MM X 8000 LB/IN²,
SERIAL NO. 684 - 1996